|
 |
TECHNICAL SPECIFICATIONS
| Sizes |
M4-M12 or #8-1/2" |
| Style |
Multi-Thread or Single Thread |
| Finish |
0-1000 Hrs |
| Retainers |
Various Styles |
| Panel Sizes |
0.6mm-8mm or 0.02 |
| Applications |
Panel Edge, Mid Panel |
|
|
U-NUTS
ITW's single-piece, multiple or single thread "U" nuts have successfully replaced most two-piece designs, offering equivalent strength, significantly reduced weight, better prevailing torque - all at a lower per-unit cost. During assembly, our high-performance "U" nut is placed over the edge of a stamped panel, or through a pre-stamped slot, and is simply pushed until the rear of the fastener locates against the panel edge or snaps into the clearance hole. Can be used on plastic panels. Single-thread "U" nuts are also available.
- Single piece construction from high carbon spring steel prevents separation of threaded nut from retainer legs.
- Austempered generally in a range of H"V"446-513 (Rockwell 45-50).
- Self retaining feature allows for one hand assembly.
- Free floating characteristics allow self alignment with bolt.
- Lighter, stronger, more reliable, less expensive than other types of fasteners.
- Provided in sizes 4mm-12mm. English unit also available.
- Prevailing torque (locking feature) can be incorporated into the threaded sleeve.
- Can be used on plastic panels.
- Performance Class 9 is standard with Class 10 availability.
dlentz@itwcip.com. |
